Perpustakaan Digital ITB

The expansibility and mechanical properties of shale are significantly influenced by water-based muds (WBMs); thus, it is necessary to mitigate this effect to avoid borehole instabilities in drilling operation. Potassium chloride (KCl) is usually used as inhibitor to reduce hydration of shales. In this study, we investigated the inhibitory efficiency of KCl on shale through a series of experiments, including dynamic linear swelling (DLS) tests and uniaxial compressive strength (UCS) tests, to provide reference for the design of WBMs. These tests were conducted on shale samples soaked in KCl solution for 24, 48, 72, and 96 h with saline concentrations of 0%, 2%, 4%, 6%, and 8%. Experimental results show that samples with microcracks and bedding fissures have the highest swelling increase and the largest strength reduction after immersion in solution. The swelling potential decreased with increasing KCl concentration. In addition, KCl exhibited a certain inhibitory effect on the weakening of the mechanical properties of samples. An increase in the KCl concentration increases the compressive strength and elastic modulus, and decreases the Poisson's ratio. However, in terms of homogeneous samples, the UCS test results show that exposure to water is weakly related to weakening of the mechanical properties of shale samples. We found that immersing the shale in KCl solution for a longer time decreases the compressive strength, increases the Poisson's ratio, and decreases the elastic modulus.