digilib@itb.ac.id +62 812 2508 8800

GAS LIFT OPTIMIZATION WITH DEEP GAS LIFT (DGL) FOR WELL SID-01

Penulis : Alfia Dian Nur Salma [12219063]
Kontributor / Dosen Pembimbing :
  • Wijoyo Niti Daton, S.T, M.T.
  • Prasandi Abdul Aziz, S.Si., M.T.
  • Cio Cio Mario, S.T., M.T.
Jenis Koleksi : Tugas Akhir
Penerbit : Teknik Perminyakan
Fakultas : Fakultas Teknik Pertambangan dan Perminyakan
Subjek : Mining & related operations
Kata Kunci : Gas Lift, DGL system, injection depth, production, optimization.
Sumber :
Staf Input/Edit : Suharsiyah   Suharsiyah
File : 1 file
Tanggal Input : 25 Jul 2023

ABSTRAK Alfia Dian Nur Salma
PUBLIC Suharsiyah

lower section of tubing so the produced fluid will flow easier. It is suitable for offshore and deviated wells, such as SID-01 which has been produced with a gas lift system. The gas lift injection point of this well is located far from the perforation. Therefore, the DGL system is installed to deepen the injection depth and increase production without pulling out the tubing, which requires more time and cost. The simulation and modeling of the study were conducted with commercial software to design and optimize the gas lift configuration so that the production of the well would be increased. By applying sensitivity analysis, the optimal depth and rate of gas lift injection were estimated based on the well's response to each parameter. Optimized gas lift design also takes consideration for the initial gas lift mandrel set up. After analyzing gas lift injection depth and rate, the optimal model with injection depth of 6800 ft.MD and rate of 3 mmstb/day will increase the oil production of the well by 69.2% with pressure drawdown increase of 65.6%.

Artikel Terkait