i PENCITRAAN RESISTIVITAS BAWAH PERMUKAAN LAPANGAN PANAS BUMI “X” DI PROVINSI JAWA BARAT MENGGUNAKAN LONG- OFFSET TOMOGRAFI RESISTIVITAS 2D TUGAS AKHIR Karya tulis sebagai salah satu syarat untuk memperoleh gelar Sarjana dari Institut Teknologi Bandung Oleh: MUHAMMAD RIDHO NURUL IHSAN NIM 10217063 PROGRAM STUDI SARJANA FISIKA FAKULTAS MATEMATIKA DAN ILMU PENGETAHUAN ALAM INSTITUT TEKNOLOGI BANDUNG 2022 i ABSTRAK PENCITRAAN BAWAH PERMUKAAN LAPANGAN PANAS BUMI “X” DI PROVINSI JAWA BARAT MENGGUNAKAN LONG-OFFSET TOMOGRAFI RESISTIVITAS 2D Oleh: Muhammad Ridho Nurul Ihsan NIM: 10217063 Eksplorasi dan pengembangan lapangan panas bumi memerlukan karakterisasi bawah permukaan yang baik. Karakterisasi tersebut diperlukan untuk menentukan struktur bawah permukaan, zona alterasi, play system lapangan panas bumi yang optimal. Salah satu metode geofisika yang dapat memetakan bawah permukaan bumi dengan resolusi lateral dan vertikal yang baik adalah metode geolistrik atau tomografi resistivitas. Metode ini kemudian dikembangkan dengan menambah bentangan untuk injeksi arus maupun pengukuran tegangan sehingga menjadi metode Long-Offset Tomogafi Resistivitas yang diharapkan dapat menghasilkan model bawah permukaan dengan kedalaman penetrasi yang lebih dalam. Pengukuran dilakukan dengan bentangan sepanjang ±2760 meter dengan 24 elektroda yang memiliki jarak (spasi) ±120 meter. Konfigurasi pengukuran yang digunakan adalah konfigurasi Wenner-Alpha dan Wenner-Schlumberger. Konfigurasi tersebut digunakan karena memiliki resolusi lateral dan jangkauan kedalaman yang paling baik dibandingkan konfigurasi lainnya. Data yang diperoleh dari pengukuran di lapangan kemudian dilakukan pengolahan melalui proses inversi menggunakan software RES2DINV. Proses inversi bertujuan untuk menentukan nilai resistivitas sebenarnya berdasarkan resistivitas semu yang diperoleh. Berdasarkan hasil pemodelan inversi 2D yang telah diperoleh, untuk konfigurasi Wenner-Alpha, kedalaman penetrasi yang diperoleh sekitar 470 meter, serta model tersebut memiliki penampang lateral yang cukup baik. Sedangkan untuk konfigurasi Wenner-Schlumberger, kedalaman penetrasi yang diperoleh sekitar 570 meter, namun penampang lateral memiliki kontur yang cenderung merata pada kedalaman ±300 meter. Hasil interpretasi dari dua konfigurasi tersebut menunjukkan bahwa terdapat zona alterasi hidrotermal dan batuan penutup (cap rock), yang memiliki resistivitas rendah, intrusi magma beku yang memiliki resistivitas tinggi pada kedalaman yang cukup dangkal, serta zona sesar atau ii patahan yang merupakan zona dengan perpindahan batuan resistivitas rendah ke batuan resistivitas tinggi secara signifikan pada lapangan panas bumi tersebut. Hasil pemodelan tersebut telah sesuai dengan kondisi geologi dan keberadaan sumur panas bumi di lapangan tersebut. Sehingga, metode ini dapat dijadikan sebagai salah satu metode Geofisika untuk eksplorasi dan pengembangan lapangan panas bumi. Kata kunci: Inversi, Panas bumi, Tomografi Resistivitas, Wenner-Alpha, Wenner- Schlumberger. iii ABSTRACT SUBSURFACE RESISTIVITY IMAGING OF “X” GEOTHERMAL FIELD IN WEST JAVA PROVINCE USING 2D LONG-OFFSET RESISTIVITY TOMOGRAPHY by Muhammad Ridho Nurul Ihsan NIM : 10217063 Exploration and development of geothermal fields require good subsurface characterization. This characterization is needed to identify the subsurface structure, alteration zone, and optimal geothermal field play system. One of the geophysical methods that can map the subsurface of the earth with the good lateral and vertical resolution is the geoelectric method or resistivity tomography. This method was then developed by adding a stretch for current injection and voltage measurement so that it became the Long-Offset Resistivity Tomography method which is expected to produce a subsurface model with a deeper penetration depth. Measurements were carried out with a stretch of ±2760 meters with 24 electrodes having a distance of ±120 meters. The measurement configuration used is the Wenner-Alpha and Wenner-Schlumberger configurations. This configuration is used because it has the best lateral resolution and depth range compared to other configurations. The data obtained from field measurements are then processed through an inversion process using the RES2DINV software. The inversion process aims to determine the actual resistivity value based on the apparent resistivity obtained. Based on the 2D inversion modeling results that have been obtained, for the Wenner-Alpha configuration, the penetration depth obtained is about 470 meters, and the model has a fairly good lateral cross-section. As for the Wenner- Schlumberger configuration, the penetration depth obtained is about 570 meters, but the lateral section has a contour that tends to be evenly distributed at a depth of ±300 meters. The results of the interpretation of the two configurations indicate that there are hydrothermal alteration zones and cap rock, which have low resistivity, igneous magma intrusion which has high resistivity at a fairly shallow depth, and fault zones which are zone with significant displacement of low resistivity rock to high resistivity rock in that geothermal field. The modeling results already iv correspond with the geological conditions and the presence of geothermal wells in the field. Thus, this method can be used as a geophysical method for the exploration and development of geothermal fields. Keywords: Geothermal, Inversion, Resistivity Tomography, Wenner-Alpha, Wenner-Schlumberger.