PENGEMBANGAN MEDIA KOMUNIKASI DATA PADA PERANGKAT TOMOGRAFI IMPEDANSI ELEKTRIK UNTUK APLIKASI TELEMEDIS TESIS Karya tulis sebagai salah satu syarat untuk memperoleh gelar Magister dari Institut Teknologi Bandung Oleh RENDY NURMANSYAH NIM: 23818001 (Program Studi Magister Instrumentasi dan Kontrol) INSTITUT TEKNOLOGI BANDUNG Juni 2022 ii ABSTRAK PENGEMBANGAN MEDIA KOMUNIKASI DATA PADA PERANGKAT TOMOGRAFI IMPEDANSI ELEKTRIK UNTUK APLIKASI TELEMEDIS Oleh RENDY NURMANSYAH NIM: 23818001 (Program Studi Magister Instrumentasi dan Kontrol) Perangkat tomografi impedansi elektrik (TIE) meski memiliki kelemahan umum berupa resolusi citra yang rendah, namun memiliki kelebihan diantaranya desain yang sederhana, komponen perangkat yang relatif murah, dan portabilitas yang tinggi. Karenanya pada bidang medis TIE sangat cocok digunakan pada remote area sebagai diagnosis awal, namun karena didaerah terpencil maka komunikasi data menjadi hambatan. Untuk keandalan komunikasi data serta meringankan beban komputasi pengolahan rekonstruksi citra, maka dikembangkan sistem protokol komunikasi data untuk aplikasi telemedis dalam bentuk data numerik serta data citra berbasis Internet of Things (IoT). Penelitian memiliki 4 tahapan, pertama membuat simulasi rekonstruksi citra TIE menggunakan program EIDORS dari Matlab. Kedua membuat aplikasi Android menggunakan bahasa pemrograman Kotlin yang akan digunakan media pengiriman data numerik TIE ke basis data. Ketiga membuat Cloud basis data untuk menampung data pengguna beserta data citra pengguna. Keempat membangun Cloud Virtual Machine (VM) yang telah dimasukan program rekonstruksi di tahap pertama untuk mengolah data numerik menjadi citra rekonstruksi. Hasil rekonstruksi citra dapat diakses kembali dari basis data mengunakan aplikasi Android. Hasil percobaan menunjukan rekonstruksi citra menggunakan komputasi VM sedikit lebih cepat dibandingkan menggunakan laptop. Kata Kunci: tomografi impedansi elektrik, internet of things, cloud computing iii ABSTRACT DEVELOPMENT OF DATA COMMUNICATION ON ELECTRICAL IMPEDANCE TOMOGRAPHY DEVICE S FOR TELEMEDICINE APPLICATIONS by RENDY NURMANSYAH NIM: 23818001 (Master Program in Instrumentation and Control) Electrical impedance tomography (EIT) devices, although they have a general weakness in the form of low image resolution, have advantages such as simple design, relatively inexpensive device components, and high portability. Therefore, in the medical field, EIT is very suitable for use in remote areas as an initial diagnosis, but because it usage in a remote area, data communication becomes an obstacle. For the reliability of data communication and to ease the computational burden of image reconstruction processing, a data communication protocol system for telemedicine applications was developed in the form of numerical data and image data based on the Internet of Things (IoT). The research has 4 stages, the first is making a simulation of EIT image reconstruction using the EIDORS program from Matlab. Second, create an Android application using the Kotlin programming language which will be used as the medium for sending EIT numeric data to the database. Third, create a Cloud Database to accommodate user data along with raw image data. Fourth, build a Cloud Virtual Machine (VM) which has been included the reconstruction program in the first stage to process numerical data into a reconstructed image. The results of the image reconstruction can be accessed again from the database using the android application. The experimental results show that image reconstruction using VM computing is a bit faster than using a laptop. Keywords: electrical impedance tomography, internet of things, cloud computing iv LEMBAR PENGESAHAN PENGEMBANGAN MEDIA KOMUNIKASI DATA PADA PERANGKAT TOMOGRAFI IMPEDANSI ELEKTRIK UNTUK APLIKASI TELEMEDIS Oleh RENDY NURMANSYAH NIM: 23818001 (Program Studi Magister Instrumentasi dan Kontrol) Institut Teknologi Bandung Menyetujui Tim Pembimbing Tanggal 20 Juni 2022 Pembimbing Pertama Pembimbing Kedua Prof. Deddy Kurniadi Dr.Eng Ir.